clinical.releafapp.com

Tag: how-to-remove-drill-bit

  • How To Remove A Bit From A Drill

    When working with a drill, it is inevitable that the bit will ultimately have to be eliminated. Whether or not you are altering bits for a brand new job or just cleansing the drill, understanding easy methods to take away a bit safely and effectively is important. Whereas the method could seem simple, there are just a few key steps to make sure you do it appropriately and keep away from any potential hazards.

    Step one is to disconnect the drill from the facility supply. It is a essential security precaution that ought to by no means be missed. As soon as the drill is unplugged, firmly grasp the physique of the drill with one hand and the bit with the opposite. Place your thumbs behind the chuck, which is the a part of the drill that holds the bit in place, and apply mild strain inward. Whereas sustaining strain along with your thumbs, rotate the chuck counterclockwise utilizing your different hand. As you rotate, the chuck will loosen, and the bit will ultimately come free.

    In case you encounter any resistance whereas making an attempt to take away the bit, do not power it. As an alternative, strive tapping the chuck calmly with a hammer or different blunt object. This can assist break any cussed particles or corrosion which may be stopping the bit from coming free. As soon as the bit is eliminated, examine it for any injury. If the bit is broken, it needs to be discarded and changed with a brand new one. Correct upkeep and care of your drill and bits will guarantee they carry out optimally and final for a few years to come back.

    How To Take away A Bit From A Drill

    If that you must take away a bit from a drill, there are just a few easy steps you may observe. First, unplug the drill from the facility supply. Then, grasp the bit with one hand and the drill physique with the opposite hand. Twist the bit counterclockwise till it’s free. If the bit is caught, you may strive utilizing a pair of pliers to grip the bit and twist it. As soon as the bit is free, you may pull it straight out of the drill.

    Listed here are some extra ideas for eradicating a bit from a drill:

    • If the bit is caught, you may strive utilizing a penetrating oil to loosen it.
    • If you’re utilizing a cordless drill, make it possible for the battery is totally charged earlier than you begin.
    • Watch out to not overtighten the bit when you find yourself reinserting it into the drill.

    Folks Additionally Ask

    How do I take away a drill bit and not using a key?

    If you do not have a key, you may strive utilizing a pair of pliers to grip the bit and twist it counterclockwise. It’s also possible to strive utilizing a rubber band to create friction between the bit and the drill chuck. It will assist to loosen the bit so as to take away it by hand.

    How do I take away a damaged drill bit from a drill?

    If the drill bit is damaged, you may strive utilizing a pair of pliers to grip the damaged finish of the bit and twist it counterclockwise. It’s also possible to strive utilizing a hacksaw to chop the damaged bit into smaller items so as to take away them extra simply.

    How do I take away a drill bit from a drill press?

    To take away a drill bit from a drill press, first loosen the chuck by turning the chuck key counterclockwise. Then, pull the bit straight out of the chuck. If the bit is caught, you may strive utilizing a penetrating oil to loosen it.

  • 5 Easy Ways to Remove a Stuck Drill Bit from Your Drill

    5 Easy Ways to Remove a Stuck Drill Bit from Your Drill

    Drill bit stuck in drill
    $title$

    Caught drill bits could be a irritating downside, particularly while you’re in the course of a undertaking. However do not despair! There are a number of easy strategies you possibly can attempt to take away a caught drill bit out of your drill. On this article, we’ll stroll you thru every step of the method, from figuring out the issue to securely eradicating the bit. Whether or not you are a seasoned DIYer or an entire novice, we have got you coated.

    First, it is necessary to establish the reason for the caught drill bit. The commonest causes embody: utilizing a uninteresting or broken drill bit, making use of an excessive amount of strain whereas drilling, or drilling into a cloth that’s too arduous for the drill bit. As soon as you have recognized the trigger, you can begin to troubleshoot the issue. If the drill bit is uninteresting or broken, merely change it with a brand new one. In case you’re making use of an excessive amount of strain whereas drilling, attempt utilizing a lighter contact. And when you’re drilling into a cloth that’s too arduous for the drill bit, think about using a unique kind of drill bit or drilling at a slower velocity.

    In case you’ve tried all the above and the drill bit remains to be caught, there are a number of extra strategies you possibly can attempt. One choice is to make use of a pair of pliers to grip the drill bit and twist it forwards and backwards. Another choice is to make use of a penetrating oil to loosen the bit. Lastly, you possibly can attempt utilizing a warmth gun to warmth the chuck of the drill, which is able to assist to develop the metallic and loosen the bit.

    How you can Take a Drill Bit Out of a Drill

    In case you’re new to drilling, it’s possible you’ll not know how one can take away a drill bit from the drill. It is truly fairly easy, however there are some things it’s essential know to do it safely and appropriately.

    First, make it possible for the drill is turned off and unplugged. Then, maintain the drill with one hand and the drill bit with the opposite. Twist the drill bit counterclockwise to loosen it. As soon as it is free, you possibly can pull it out of the drill.

    If the drill bit is caught, you possibly can attempt utilizing a pair of pliers to loosen it. Watch out to not injury the drill or the drill bit.

    Individuals Additionally Ask

    How do I take away a damaged drill bit from a drill?

    If the drill bit is damaged, you possibly can attempt utilizing a pair of needle-nose pliers to take away it. Grip the damaged bit as near the chuck as doable and pull it straight out.

    How do I forestall the drill bit from getting caught within the drill?

    There are some things you are able to do to stop the drill bit from getting caught within the drill. First, make it possible for the drill bit is the proper measurement for the outlet you might be drilling. Second, use a pointy drill bit. A uninteresting drill bit is extra prone to get caught.

    What ought to I do if the drill bit is just too tight to take away?

    If the drill bit is just too tight to take away, you possibly can attempt utilizing a penetrating oil to loosen it. Apply the penetrating oil to the drill bit and let it sit for a couple of minutes. Then, attempt to take away the drill bit.

  • 4 Ways to Get a Bit Out of a Drill

    4 Ways to Get a Bit Out of a Drill

    4 Ways to Get a Bit Out of a Drill
    $title$

    As a craftsman, one of the vital widespread challenges that will come up is having a drill bit turn into caught in your energy drill. This could be a irritating and time-consuming concern, particularly if you find yourself in the midst of a mission. Nevertheless, there are a number of efficient strategies you possibly can make use of to take away a caught drill bit rapidly and safely. On this article, we’ll delve into the assorted strategies and supply step-by-step steering on find out how to efficiently extract a drill bit out of your energy device.

    Earlier than trying to take away the caught drill bit, it’s important to make sure your security. At all times disconnect the ability drill from its energy supply earlier than performing any troubleshooting or restore work. Moreover, put on acceptable security gear, reminiscent of gloves and security glasses, to guard your self from potential accidents. Upon getting ensured your security, you possibly can proceed with the next strategies to extract the drill bit.

    One widespread technique for eradicating a caught drill bit includes utilizing a pair of pliers or locking pliers. Fastidiously grip the drill bit as near the chuck as potential and gently try and twist and pull it unfastened. Alternatively, you should utilize a devoted drill bit extractor device. These specialised instruments are designed to suit securely across the drill bit and supply a gripping floor for extraction. Insert the extractor device into the chuck and tighten it till it engages with the drill bit. By making use of downward stress and turning the extractor counterclockwise, you possibly can break the bit unfastened from the chuck.

    Marking and Measuring for Correct Drilling

    Getting the bit out of a drill requires cautious marking and measuring to make sure correct and exact drilling. Here is a step-by-step information that can assist you mark and measure for correct drilling:

    1. Plan the Gap Location:

    Decide the specified location of the outlet and mark it clearly with a pencil or marker. Use a ruler or measuring tape to measure the gap from the marking to the sting of the workpiece.

    2. Decide the Drill Bit Dimension:

    Select the right drill bit dimension primarily based on the diameter of the outlet you wish to create. Examine the drill bit’s dimension markings or use a drill bit gauge to measure its diameter.

    3. Mark the Drill Depth:

    Mark the specified depth of the outlet on the drill bit utilizing a bit of tape or a middle punch. This mark will point out how far the drill ought to penetrate the workpiece.

    4. Clamp the Workpiece:

    Safe the workpiece firmly in a vise or on a workbench utilizing acceptable clamps. This may stop it from shifting throughout drilling.

    Desk: Drill Bit Sizes and Really helpful Depths for Frequent Supplies

    Materials Drill Bit Dimension Really helpful Depth
    Wooden 1/2″ or smaller As much as 6 inches
    Steel 1/8″ or smaller As much as 3 inches
    Masonry 1/4″ or smaller As much as 2 inches
    Plastic 1/4″ or smaller As much as 1 inch

    Observe: These are common pointers. Particular depth suggestions could differ relying on the mission necessities and drill bit used.

    Avoiding Frequent Errors: Overheating and Binding

    Overheating

    Overheating can happen when the drill bit just isn’t sharp, the fabric being drilled is simply too arduous, or the drill is getting used for an prolonged interval. To forestall overheating, use a pointy drill bit, lubricate the bit with chopping oil, and take frequent breaks to permit the drill to chill down.

    Binding

    Binding happens when the drill bit turns into caught within the materials being drilled. To forestall binding, use a pointy drill bit, apply regular stress, and maintain the drill shifting. If the bit does bind, cease drilling and reverse the route of rotation to free the bit.

    Avoiding Frequent Errors: Overheating and Binding (Additional Element)

    To keep away from overheating and binding, comply with these extra suggestions:

    Tip Description
    Use a pointy drill bit A pointy bit will minimize by means of the fabric extra simply, decreasing friction and warmth.
    Lubricate the bit Slicing oil will assist to cut back friction and maintain the bit cool.
    Take frequent breaks Permitting the drill to chill down will stop it from overheating.
    Apply regular stress Making use of an excessive amount of stress may cause the bit to bind.
    Hold the drill shifting A shifting bit is much less more likely to bind.
    Reverse the route of rotation If the bit does bind, reversing the route of rotation can assist to free it.

    Lubrication

    Making use of lubrication to the bit will assist scale back friction and make it simpler to take away. Use a penetrating oil or graphite powder, and apply it to the bit’s shaft and the within of the drill chuck.

    Middle Punch

    A middle punch can be utilized to create a small indentation within the heart of the outlet you are attempting to drill. This may assist maintain the drill bit from wandering and can make it simpler to get it began.

    Pitons

    Pitons are small, wedge-shaped units that may be inserted right into a gap to create a short lived anchor. If you’re drilling in a very tough or harmful location, pitons can be utilized to assist stabilize the drill and stop it from falling.

    Further Suggestions

    • Use a pointy bit.
    • Drill slowly and steadily.
    • Apply even stress to the drill.
    • If the bit will get caught, reverse the drill and take a look at once more.
    • Do not attempt to pressure the bit out of the outlet.
    • If you’re drilling into steel, use a chopping fluid to assist cool the bit.
    • Put on security glasses and gloves when drilling.
    • Pay attention to your environment and take precautions to keep away from hazards.
    • If you’re drilling right into a wall, be sure to test for electrical wires and plumbing earlier than you begin.
    • If you’re drilling right into a ceiling, be sure you use a drill with a security strap.

    Caught Bit Removing Strategies

    How To Get A Bit Out Of A Drill

    The chuck of a drill is designed to carry the bit securely in place whilst you work. Nevertheless, there could also be instances when you might want to take away the bit for cleansing or alternative. If the chuck is caught, it may be irritating to attempt to take away the bit. Listed below are a number of tips about find out how to get a bit out of a drill.

    1. **Flip off the drill and unplug it.** That is vital for security causes. You do not need the drill to start out up by chance whilst you’re attempting to take away the bit.

    2. **Attempt to loosen the chuck by hand.** Grasp the chuck with one hand and twist it counterclockwise. If the chuck just isn’t too tight, it ought to loosen simply.

    3. **Use a wrench to loosen the chuck.** If the chuck is simply too tight to loosen by hand, you should utilize a wrench that can assist you. Place the wrench on the chuck and switch it counterclockwise. Watch out to not overtighten the wrench, or you might injury the chuck.

    4. **Faucet the chuck with a hammer.** If the chuck continues to be caught, you possibly can attempt tapping it with a hammer. This can assist to loosen the chuck and make it simpler to take away the bit.

    5. **Use a penetrating oil.** If all else fails, you possibly can attempt utilizing a penetrating oil to assist loosen the chuck. Apply the oil to the chuck and let it sit for a couple of minutes. This can assist to interrupt down the rust and make it simpler to take away the bit.

    Folks Additionally Ask:

    How do I take away a stripped drill bit?

    If the drill bit is stripped, you possibly can attempt utilizing a pair of pliers to grip the bit and switch it counterclockwise. It’s also possible to attempt utilizing a screw extractor to take away the bit.

    How do I take away a damaged drill bit?

    If the drill bit is damaged, you possibly can attempt utilizing a pair of needle-nose pliers to grip the damaged bit and switch it counterclockwise. It’s also possible to attempt utilizing a screw extractor to take away the bit.

    How do I stop the drill bit from getting caught?

    There are some things you are able to do to stop the drill bit from getting caught. First, make it possible for the chuck is correctly tightened. Second, use a lubricant on the drill bit to assist scale back friction. Lastly, keep away from overtightening the chuck, as this could injury the bit.

    Methodology Steps
    Vice Grips
    1. Put on gloves to guard your arms.
    2. Grip the bit with the vice grips as near the chuck as potential.
    3. Gently twist the vice grips backwards and forwards whereas pulling on the drill.
    Locking Pliers
    1. Put on gloves to guard your arms.
    2. Use locking pliers to grip the bit as near the chuck as potential.
    3. Gently squeeze the locking pliers whereas pulling on the drill.
    Extractor Instrument
    1. Screw the extractor device onto the bit.
    2. Gently flip the device counterclockwise whereas pulling on the drill.
    3. As soon as the bit is unfastened, take away the extractor device.
  • 4 Ways to Get a Bit Out of a Drill

    5 Simple Steps to Remove a Bit from a Drill

    4 Ways to Get a Bit Out of a Drill

    When working with drills, it is inevitable that you will encounter a caught bit every so often. Whereas it may be tempting to resort to brute drive, there are safer and simpler methods to take away a bit from a drill. On this article, we’ll offer you step-by-step directions on how one can safely and effectively take away a caught drill bit. We’ll cowl numerous strategies, together with utilizing a bit remover, pliers, and a hammer. Moreover, we’ll focus on security precautions and provide tricks to stop future caught bits.

    Earlier than trying to take away a caught drill bit, it is essential to make sure security. At all times put on security glasses and gloves to guard your self from flying particles or sharp edges. Moreover, make sure the drill is unplugged or the battery is eliminated to stop unintended activation. If attainable, clamp the workpiece securely to stop it from shifting when you work. As soon as security measures are in place, you’ll be able to proceed with the next strategies to take away the caught bit.

    The primary technique includes utilizing a bit remover, a specialised software designed to extract caught bits. Merely insert the bit remover into the chuck and tighten it securely. Then, gently flip the bit remover counterclockwise to loosen the bit. If the bit is especially cussed, you might want to use some penetrating oil or lubricant to the threads earlier than utilizing the bit remover. In some instances, you might want to make use of a pair of pliers or a hammer to help in eradicating the bit. Nonetheless, it is necessary to make use of warning when making use of extreme drive, as you’ll be able to injury the drill or the bit itself.

    Gathering Mandatory Instruments

    Earlier than you start, it’s important to assemble the required instruments to take away the bit from the drill safely and effectively. This is a listing of what you will want:

    Adjustable Wrench or Socket Wrench

    An adjustable wrench or socket wrench is the first software used to loosen the chuck and launch the bit. Select a wrench that’s the acceptable dimension for the chuck in your drill. When you’re utilizing a socket wrench, be sure to have a socket that matches the chuck’s diameter.

    Suggestions for Selecting the Proper Wrench:

    • Examine the chuck in your drill and decide its approximate diameter.
    • Choose an adjustable wrench that may open to a width barely bigger than the chuck’s diameter.
    • If utilizing a socket wrench, select a socket that’s the identical dimension because the chuck’s diameter.
    • Make sure that the wrench is in good situation and its jaws are usually not broken or worn.
    Software Description
    Adjustable Wrench Versatile software with adjustable jaws for numerous chuck sizes.
    Socket Wrench Particular software with interchangeable sockets for a exact match on the chuck.

    Eradicating the Chuck Key

    The chuck secret is a small, L-shaped software that’s used to tighten and loosen the chuck of a drill. When the chuck is loosened, the drill bit may be eliminated or inserted. To take away the chuck key, comply with these steps:

    1. Find the chuck key gap. The chuck key gap is usually positioned on the facet of the drill, close to the chuck.
    2. Insert the chuck key into the outlet. The chuck key ought to match snugly into the outlet.
    3. Flip the chuck key counterclockwise. As you flip the chuck key, the chuck will loosen.
    4. Pull the chuck key out of the outlet. As soon as the chuck is free, you’ll be able to take away the chuck key by pulling it out of the outlet.

    **Further Notes for Eradicating the Chuck Key**

    • If the chuck secret is caught, you’ll be able to strive utilizing a pair of pliers to loosen it.
    • If you do not have a chuck key, you should use a pair of pliers to loosen the chuck. Nonetheless, this will injury the chuck, so it isn’t really useful.
    • Watch out to not overtighten the chuck key. Overtightening the chuck key can injury the drill.
    Chuck Key Measurement Drill Measurement
    1/4" Small drills (e.g., 1/8" – 1/4")
    3/8" Medium drills (e.g., 1/4" – 1/2")
    1/2" Giant drills (e.g., 1/2" – 1")

    Using a Drill Bit Extractor

    A drill bit extractor is a specialised software designed to take away damaged or caught drill bits from a drill chuck. It sometimes consists of a set of small, conical-shaped extractors that match into the damaged drill bit’s flutes. To make use of a drill bit extractor:

    1. Choose the suitable extractor dimension: Select an extractor that’s barely smaller than the diameter of the damaged drill bit.

    2. Insert the extractor into the drill chuck: Place the extractor into the drill chuck and tighten it securely.

    3. Interact the extractor with the damaged drill bit: Rigorously align the extractor with the damaged drill bit and gently apply strain.

    4. Reverse the drill: Whereas sustaining strain on the extractor, slowly reverse the drill. The extractor will have interaction with the damaged drill bit and start to extract it.

    5. Extract the damaged drill bit: Because the extractor unthreads the damaged drill bit, steadily enhance the strain till the bit is totally eliminated.

    6. Take away the extractor: As soon as the drill bit is eliminated, loosen the drill chuck and thoroughly take away the extractor.
    Further Suggestions for Utilizing a Drill Bit Extractor
    • Use a penetrating oil to lubricate the damaged drill bit and extractor flanges.
    • Apply light strain whereas reversing the drill to keep away from damaging the extractor or drill chuck.
    • If the damaged drill bit is deeply embedded, you might want to make use of a collection of various extractor sizes to steadily take away it.
    • If the damaged drill bit is especially cussed, you might want to make use of a mixture of strategies, reminiscent of a drill bit extractor and warmth or a penetrating rust remover.

    Making use of Gripping Instruments

    If the drill bit is securely caught, you might want to make use of gripping instruments to take away it. Listed here are the steps to take action:

    1. Use a pair of locking pliers. Grip the drill bit as near the chuck as attainable and switch counterclockwise to loosen it.
    2. Use a pipe wrench. Place the pipe wrench over the chuck and switch counterclockwise to loosen the drill bit.
    3. Use an adjustable wrench. Place the adjustable wrench over the chuck and switch counterclockwise to loosen the drill bit.

    Suggestions for utilizing gripping instruments:

    1. Be sure the gripping software is securely mounted to the drill bit.
    2. Apply regular strain and switch slowly counterclockwise.
    3. If the drill bit remains to be caught, strive making use of penetrating oil to the threads and permitting it to sit down for a couple of minutes earlier than making an attempt once more.
    4. If the drill bit is manufactured from a tender materials, reminiscent of aluminum, watch out to not overtighten the gripping software, as you possibly can injury the drill bit.

    Here’s a table summarizing the gripping instruments and their benefits and downsides:

    Software Benefits Disadvantages
    Locking pliers Straightforward to make use of, safe grip Can injury drill bit if overtightened
    Pipe wrench Sturdy grip, much less more likely to injury drill bit May be troublesome to make use of in tight areas
    Adjustable wrench Versatile, can be utilized on quite a lot of drill bits Doesn’t present as safe a grip as locking pliers or pipe wrench

    Lubricating the Bit

    To forestall the bit from seizing up within the chuck, it is important to lubricate it earlier than inserting it. This is a step-by-step information to lubricating the bit:

    1. Select the Proper Lubricant

    Choose a lubricant particularly designed for metal-to-metal contact, reminiscent of a penetrating oil or a machine oil.

    2. Apply Lubricant to the Bit

    Utilizing a clear material or brush, apply a small quantity of lubricant to the shank of the bit, the place it’ll make contact with the chuck.

    3. Work the Lubricant In

    Gently rotate the bit backwards and forwards within the chuck to distribute the lubricant evenly.

    4. Wipe Off Extra

    Use a clear material to wipe off any extra lubricant that will have been utilized to the skin of the bit or chuck.

    5. Re-Lubricate Usually

    Relying on the utilization frequency, it is really useful to re-lubricate the bit each 1-2 hours or while you discover it beginning to stick within the chuck.

    6. Use a Lubricant Pen

    For fast and straightforward lubrication, think about using a lubricant pen that may be utilized on to the bit shank.

    7. Select the Proper Lubricant for the Materials

    When drilling arduous supplies like metallic, use a heavy-duty lubricant like tapping fluid. For softer supplies like wooden or plastic, a lighter lubricant like penetrating oil will suffice.

    8. Troubleshooting: Bit Nonetheless Seized

    If the bit remains to be seized:

    Potential Trigger

    Resolution

    Inadequate lubrication

    Apply further lubricant

    Bit is previous or broken

    Change the bit with a brand new one

    Chuck isn’t correctly tightened

    Tighten the chuck firmly

    Tapping the Bit Free

    This technique is efficient for eradicating caught bits that can not be loosened by hand. Tapping includes making use of a drive to the drill whereas holding it regular. The drive must be directed in the identical course because the bit rotation.

    To faucet the bit free, comply with these steps:

    1. Put on security glasses and gloves.
    2. Place the drill on a secure floor, with the chuck going through up.
    3. Insert a bit of wooden or metallic (reminiscent of a screwdriver or wrench) into the chuck.
    4. Maintain the drill firmly with one hand and the article within the chuck with the opposite hand.
    5. Faucet the deal with of the article sharply with a hammer.
    6. Proceed tapping till the bit loosens.
    7. As soon as the bit is free, take away it from the chuck by hand.

    Further Suggestions

    * If the bit could be very caught, you might want to make use of a stronger object for tapping, reminiscent of a bigger hammer or a crowbar.
    * Watch out to not apply an excessive amount of drive, as this might injury the drill or the bit.
    * In case you are unable to take away the bit by tapping, you might want to make use of a special technique, reminiscent of utilizing a lubricant or eradicating the drill chuck.

    Methodology Steps
    Tapping
  • Put on security glasses and gloves.
  • Place the drill on a secure floor, with the chuck going through up.
  • Insert a bit of wooden or metallic into the chuck.
  • Maintain the drill firmly with one hand and the article within the chuck with the opposite hand.
  • Faucet the deal with of the article sharply with a hammer.
  • Proceed tapping till the bit loosens.
  • As soon as the bit is free, take away it from the chuck by hand.
    		•

    Tips on how to Take away a Bit from a Drill

    Eradicating a bit from a drill is a straightforward however crucial job that may be accomplished in just a few straightforward steps. The next directions will information you thru the method of eradicating a bit from a drill safely and successfully:

    1. **Flip off the drill and unplug it from the facility supply.** This can be a crucial security step that ought to by no means be skipped.
    2. **Safe the drill in a vise or clamp.** This can stop the drill from shifting while you’re eradicating the bit.
    3. **Insert a hex key or Allen wrench into the chuck of the drill.** The hex key must be the identical dimension because the screw that holds the bit in place.
    4. **Flip the hex key counterclockwise to loosen the screw.** Don’t overtighten the screw, as this might injury the drill.
    5. **Pull the bit straight out of the chuck.** If the bit is caught, you might have to faucet it gently with a hammer to loosen it.

    Individuals Additionally Ask About Tips on how to Take away Bit from Drill

    How do you take away a stripped drill bit?

    If the screw that holds the bit in place is stripped, you should use a pair of pliers to grip the screw and switch it counterclockwise. You might also want to make use of a penetrating oil to loosen the screw.

    How do you take away a drill bit that’s caught?

    If the drill bit is caught within the chuck, you’ll be able to strive tapping it gently with a hammer to loosen it. It’s also possible to strive utilizing a penetrating oil to loosen the bit.

    How do you take away a drill bit from a cordless drill?

    The steps for eradicating a drill bit from a cordless drill are the identical because the steps for eradicating a drill bit from a corded drill.