The boot menu, often known as the boot supervisor, is a menu that seems when your laptop begins up. It lets you select which working system you wish to boot from, or to entry superior troubleshooting choices. There are a number of methods to entry the boot menu on Home windows 10.
One method to entry the boot menu is to make use of the Home windows key + R keyboard shortcut. It will open the Run dialog field. Kind “msconfig” (with out the quotes) into the Run dialog field and press Enter. It will open the System Configuration utility. Within the System Configuration utility, click on on the “Boot” tab. Right here, you will notice a listing of the working programs which are put in in your laptop. Choose the working system that you just wish to boot from and click on on the “Set as default” button. Then, click on on the “OK” button to save lots of your modifications and shut the System Configuration utility. The subsequent time you restart your laptop, it’s going to boot from the working system that you just chosen.
One other method to entry the boot menu is to make use of the Shift key throughout startup. Once you see the Home windows brand seem in your display, press and maintain the Shift key. It will drive your laptop besides into the boot menu. From right here, you possibly can select which working system you wish to boot from, or entry superior troubleshooting choices. Upon getting made your choice, press Enter besides from the chosen system or choice.
Accessing the Boot Menu through System Configuration Utility
Stipulations: To entry the Boot Menu through System Configuration Utility, your PC will need to have a UEFI BIOS (Unified Extensible Firmware Interface). To verify in case your PC has UEFI BIOS, comply with these steps:
- Press Home windows Key + R to open the Run dialog field.
- Kind msinfo32 and click on OK.
- Within the System Info window, discover the BIOS Mode entry below System Abstract.
- If UEFI is displayed, your PC has a UEFI BIOS.
Steps:
- Open System Configuration Utility:
- Press Home windows Key + R to open the Run dialog field.
- Kind msconfig and click on OK. The System Configuration window will open.
- Navigate to the Boot Tab:
- Click on on the Boot tab within the System Configuration window.
- Choose the Desired Boot System:
- Beneath the Boot Choices part, use the drop-down menu to pick out the boot system you wish to prioritize. The choices could embody your inside exhausting drive, an exterior USB drive, or a community boot choice.
- Set the Boot Order:
- Use the Up and Down arrows to regulate the boot order. The system listed on the high of the listing would be the major boot system.
- Set Default Boot Choices (Non-obligatory):
- If you wish to set the chosen boot system because the default, verify the Make this boot choice everlasting field. It will forestall the boot order from altering while you make modifications to the BIOS settings.
- Apply Modifications:
- Click on Apply to save lots of your modifications.
- Restart the PC:
- Click on OK to shut the System Configuration Utility and restart your PC. The PC will boot from the chosen boot system.
Using the Superior Startup Choices Menu
To enter the Superior Startup Choices menu via Home windows 10’s settings, comply with these steps:
- Navigate to the Begin menu, then click on on “Settings” (gear icon).
- Choose “Replace & Safety” from the left-hand menu.
- Click on on “Restoration” within the left-hand menu.
- Beneath “Superior startup,” click on the “Restart now” button.
As soon as your laptop restarts, it’s going to show the Superior Startup Choices menu, which lets you boot into numerous restoration environments and troubleshooting instruments, together with the BIOS setup menu.
You can too entry the Superior Startup Choices menu utilizing a bootable USB drive. Listed below are the steps:
- Create a bootable USB drive utilizing the Media Creation Instrument (obtainable from Microsoft’s web site).
- Insert the bootable USB drive into your laptop and switch it on.
- Your laptop ought to routinely boot from the USB drive. If it does not, you could want to alter the boot order in your BIOS settings.
When you’re booted from the USB drive, comply with these steps:
- Click on on “Restore your laptop” on the preliminary setup display.
- Choose “Troubleshoot” from the Select an choice display.
- Click on on “Superior choices” after which on “UEFI Firmware Settings.”
- Click on on “Restart” to restart your laptop and enter the BIOS setup menu.
Relying in your laptop’s producer, the precise key it’s essential press to enter the BIOS setup menu could fluctuate. Frequent keys embody F1, F2, F10, and Del. Seek the advice of your laptop’s documentation or the producer’s web site for particular directions.
Troubleshooting
In the event you’re having bother getting into the BIOS setup menu, listed below are a couple of troubleshooting suggestions:
- Be certain that your keyboard is working correctly. Strive connecting a unique keyboard to your laptop and see if that works.
- Strive urgent the important thing repeatedly. Typically, you could must press the important thing a number of occasions in a row earlier than it registers.
- Strive urgent the important thing at completely different occasions through the boot course of. Some computer systems require you to press the important thing at a selected time through the boot course of, resembling instantly after the pc activates or after the BIOS brand seems.
Booting from an Exterior USB or DVD Drive
In the event you’ve created a bootable USB or DVD drive, you should use it besides your laptop and carry out numerous duties, resembling putting in a brand new working system, repairing an present one, or working diagnostic checks. Listed below are the steps besides from an exterior USB or DVD drive:
Getting ready the Exterior Drive
1. Be sure that the USB or DVD drive is bootable. This implies it should comprise the required information besides your laptop. You possibly can create a bootable drive utilizing a device like Rufus or PowerISO.
2. Insert the bootable USB or DVD drive into your laptop’s USB port or DVD drive.
Accessing the Boot Menu
1. Flip in your laptop and press a key to entry the boot menu. The important thing will fluctuate relying in your laptop’s producer. Frequent keys embody F2, F10, F12, and Esc.
2. Use the arrow keys to navigate the boot menu and choose the USB or DVD drive because the boot system.
3. Press Enter besides from the chosen system.
Troubleshooting: USB System Not Detected
In case your USB system isn’t detected within the boot menu, strive the next steps:
| Trigger | Answer |
|---|---|
| USB drive not bootable | Create a bootable USB drive utilizing a device like Rufus or PowerISO. |
| USB drive is corrupted | Format the USB drive and take a look at creating the bootable USB once more. |
| USB port difficulty | Strive connecting the USB drive to a unique USB port in your laptop. |
| BIOS settings | Test your laptop’s BIOS settings to make sure that USB booting is enabled. |
If none of those options work, you could must contact your laptop’s producer for additional help.
Modifying the BIOS Settings
To switch the BIOS settings and set the boot order, comply with these steps:
1. Enter the BIOS Menu
Restart your laptop. As the pc boots up, press the suitable key (often F2, F10, or Del) to enter the BIOS menu. The important thing could fluctuate relying in your laptop mannequin.
2. Navigate to the Boot Settings
As soon as within the BIOS menu, use the arrow keys to navigate to the Boot tab or part. This tab could also be named in another way, resembling “Boot Order” or “Boot Choices.”
3. Change the Boot Order
Within the Boot tab, find the listing of boot gadgets. Use the arrow keys or the + and – keys to maneuver the specified boot system (e.g., USB drive or exterior exhausting drive) to the highest of the listing.
4. Save and Exit
| Choice | Description |
|---|---|
| F10 (often) | Save modifications and exit the BIOS. |
| Esc | Exit the BIOS with out saving modifications. |
| Arrow keys | Navigate via the BIOS menu. |
| + and – keys | Change the boot order of gadgets. |
Press F10 (or the important thing indicated on the display) to save lots of the modifications you made to the boot order. Choose “Sure” or “OK” to verify the save operation. The pc will then reboot utilizing the brand new boot order.
Utilizing the Command Immediate
The Command Immediate is a strong device that can be utilized to carry out quite a lot of duties, together with booting into the BIOS or UEFI settings. To make use of the Command Immediate to entry the boot menu, comply with these steps:
- Press Home windows Key + R to open the Run dialog field.
- Kind cmd into the Run dialog field and click on OK.
- Within the Command Immediate window, sort the next command and press Enter:
- Upon getting entered the command, shut the Command Immediate window and restart your laptop.
- Your laptop ought to now boot into the BIOS or UEFI settings. From right here, you possibly can change the boot order or make different modifications to your laptop’s boot configuration.
bcdedit /set {default} bootmenupolicy legacy
| Command | Description |
|---|---|
| bcdedit /set {default} bootmenupolicy legacy | Units the boot menu coverage to legacy. |
Restarting with the Shift Key Held Down
Press and maintain down the Shift key whereas clicking on the “Shut down” choice. This motion will carry up the “Restart” button with the Shift key nonetheless held. Proceed holding the Shift key till the “Select an choice” display seems, the place you possibly can entry the boot menu by choosing the “Troubleshoot” choice.
via Windows Settings
This technique entails accessing the boot menu via the Home windows Settings app. To start, navigate to “Settings” from the Begin Menu, then choose “Replace & Safety” adopted by “Restoration”. Within the “Superior startup” part, you’ll discover the “Restart now” button. By holding down the Shift key whereas clicking this button, you may be directed to the “Select an choice” display, permitting you to entry the boot menu via the “Troubleshoot” choice.
via MSConfig
MSConfig is a Home windows system configuration utility that gives entry to superior boot choices. To make the most of this technique, press the Home windows key + R to open the “Run” dialog field. Kind “msconfig” and click on OK to launch MSConfig. Navigate to the “Boot” tab and verify the “Protected Boot” choice. Choose the “Minimal” choice if you happen to desire a primary protected mode expertise. Alternatively, you possibly can select “Community” mode to allow community connectivity in protected mode. Click on Apply to save lots of your modifications and restart your laptop.
| Protected Mode Choice | Description |
|-|-|
| Minimal | Fundamental protected mode with out community or system drivers |
| Community | Protected mode with community connectivity |
Resolving Startup Points via the Boot Menu
The Boot menu is important for addressing startup issues, providing numerous troubleshooting choices. It lets you:
- Change the boot order if the system is booting from the flawed system.
- Disable problematic startup gadgets.
- Run system diagnostics to establish {hardware} points.
- Begin Home windows in Protected Mode, a minimalistic mode that minimizes potential software program conflicts.
- Restore the system from a earlier restore level.
- Reset the PC, reinstalling Home windows whereas preserving consumer information.
- Use superior troubleshooting instruments like Command Immediate and System Restoration Choices.
- Carry out a clear set up of Home windows, erasing all information and functions.
Nevertheless, it is essential to make use of the Boot menu cautiously as sure choices, like resetting the PC, can have irreversible penalties. Due to this fact, it is advisable to discover easier troubleshooting strategies earlier than resorting to those extra drastic measures.
To entry the Boot menu, you usually must press a selected key or key mixture through the startup course of. The important thing varies relying on the producer and mannequin of your laptop. Generally used keys embody F1, F2, F8, Esc, or Del.
| Methodology | Description |
|---|---|
| Energy Button Reset | Maintain the ability button for 10 seconds to drive an entire shutdown. Restart the system to entry the Boot menu. |
| Superior Startup Choices from Home windows | Go to Settings > Replace & Safety > Restoration. Click on the “Restart now” button below Superior Startup. |
| Command Immediate | Boot into Home windows (if doable) and open Command Immediate as an administrator. Kind “shutdown /r /o” and press Enter. |
| System Restore Disc or USB Thumb Drive | Insert the bootable media and boot from it. Select the “Restore your laptop” choice to entry Boot menu choices. |
Troubleshooting Boot Order and Boot System Choice
1. Test the Boot Order in BIOS
Enter BIOS settings and navigate to the “Boot” or “Boot Order” part. Be sure that the specified boot system is ready as the primary boot choice.
2. Reset BIOS Settings to Default
If the boot order is appropriate, reset BIOS settings to default by urgent the “Load Defaults” or “Restore Default” choice.
3. Test for Unfastened or Broken Cables
Be sure that the SATA/IDE cables and energy cables connecting the boot system are safe and undamaged.
4. Clear CMOS
Take away the CMOS battery for a couple of minutes and re-insert it. It will reset CMOS settings, together with the boot order.
5. Change Boot Mode to UEFI or Legacy
If the boot system isn’t acknowledged, change the boot mode in BIOS settings between UEFI and Legacy. Some older boot gadgets could require Legacy mode.
6. Disable Quick Startup
Go to Home windows Settings > System > Energy & Sleep > Extra Energy Settings > Select what the ability button does > Change settings which are at present unavailable. Uncheck “Activate quick startup.” This may intrude with boot system choice.
7. Use Microsoft System Configuration Utility
Press Home windows + R, sort msconfig, and press Enter. Go to the “Boot” tab and choose the specified boot system.
8. Restore Bootloader Utilizing Command Immediate
Create a bootable Home windows 10 USB or DVD. Boot from the media, choose “Restore your laptop,” and click on “Troubleshoot.” Choose “Command Immediate” and sort the next instructions:
- bootrec /fixboot
- bootrec /fixmbr
- bootrec /rebuildbcd
Press Enter after every command to rebuild the bootloader.
Guaranteeing Compatibility with A number of Working Techniques
To make sure compatibility with a number of working programs, you will need to configure the boot order in your laptop’s BIOS settings. It will mean you can choose which working system besides from when your laptop begins up.
Listed below are the steps on find out how to configure the boot order in your BIOS settings:
- Restart your laptop.
- As quickly as your laptop begins besides up, press the important thing that’s displayed on the display to enter the BIOS settings. This key’s usually F2, F10, or Del.
- As soon as you might be within the BIOS settings, navigate to the “Boot” tab.
- Find the “Boot Order” part and use the arrow keys to maneuver the working system that you just wish to boot from to the highest of the listing.
- Press the F10 key to save lots of your modifications and exit the BIOS settings.
Your laptop will now boot into the working system that you just chosen within the BIOS settings.
Superior Configuration for A number of Working Techniques
When you’ve got a number of working programs put in in your laptop, you could wish to configure the boot order so that you could select which working system besides from every time you begin your laptop.
To do that, you possibly can create a boot menu that can listing the entire working programs which are put in in your laptop. You possibly can then use the arrow keys to pick out which working system besides from.
Listed below are the steps on find out how to create a boot menu in your BIOS settings:
- Restart your laptop.
- As quickly as your laptop begins besides up, press the important thing that’s displayed on the display to enter the BIOS settings. This key’s usually F2, F10, or Del.
- As soon as you might be within the BIOS settings, navigate to the “Boot” tab.
- Find the “Boot Menu” part and allow it.
- Press the F10 key to save lots of your modifications and exit the BIOS settings.
Your laptop will now show a boot menu every time you begin it up. You possibly can then use the arrow keys to pick out which working system besides from.
How To Get To The Boot Menu On Home windows 10
To get to the boot menu on Home windows 10, it’s essential first flip in your laptop and press the important thing that’s displayed on the display. This key’s often F2, F10, F12, or Esc. When you press this key, a menu of your laptop’s boot choices will seem.
From this menu, you possibly can choose which system you need your laptop besides from. For instance, you possibly can boot out of your exhausting drive, a USB drive, or a community drive. Upon getting chosen the specified boot system, press Enter to start out the boot course of.
If you’re unable to entry the boot menu by urgent the suitable key, you could want to alter the boot order in your laptop’s BIOS settings. To do that, you’ll need to entry the BIOS settings by urgent a selected key through the boot course of. This key’s often Del, F2, or F10.
As soon as you might be within the BIOS settings, you possibly can change the boot order by utilizing the arrow keys to navigate via the menu and choosing the specified boot system. Upon getting made your modifications, press Enter to save lots of the settings and exit the BIOS.
Folks Additionally Ask About How To Get To The Boot Menu On Home windows 10
How do I get to the boot menu on Home windows 10 and not using a keyboard?
In the event you should not have a keyboard, you possibly can entry the boot menu on Home windows 10 by urgent the ability button in your laptop and holding it down for about 10 seconds. It will drive your laptop to show off. As soon as your laptop is off, press the ability button once more to show it again on. As quickly as you see the producer’s brand, press the important thing that’s displayed on the display to entry the boot menu.
What’s the boot menu key for Home windows 10?
The boot menu key for Home windows 10 varies relying on the producer of your laptop. Frequent boot menu keys embody F2, F10, F12, and Esc. The important thing that it’s essential press shall be displayed on the display through the boot course of.
How do I alter the boot order in Home windows 10?
To vary the boot order in Home windows 10, it’s essential entry the BIOS settings. To do that, press the suitable key through the boot course of. This key’s often Del, F2, or F10. As soon as you might be within the BIOS settings, use the arrow keys to navigate via the menu and choose the Boot tab. From right here, you possibly can change the boot order by utilizing the + and – keys to maneuver the specified boot system to the highest of the listing. Upon getting made your modifications, press Enter to save lots of the settings and exit the BIOS.
